6635 Kitimat Road, Unit 32

Mississauga, Ontario

L5N 6J2, Canada

You have no items in your shopping cart.

FREE EXPEDITED SHIPPING WITHIN CANADA OVER $ 50.00. LOW SHIPPING RATES ALL OVER U.S.A

HEATED CLOTHING

Position

Grid  List 

Show10

per page
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
  1. Gen X 2 SWITCH CORD

    CA$44.95
    • Approx. length: 30" without expansion and expands to 45" when stretched 
    • Comes with 2 adapters for converting Genx 3 switch cord to Genx 2 switch cord.
    • Can also be used as Genx 3 switch cord when both adapters are not connected on each end.
    • Connect one end of the switch cord to your battery cord plug and other end to your heated clothing.
    Learn More
  2. Gen X 3 SINGLE OUTPUT TEMPERATURE CONTROLLER

    CA$59.95
    • The single output temperature controller is stylishly designed. It’s a true variable controller and comes with an inbuilt rotary on and off switch. Controller ensures that your heated clothing uses only as much power as required depending on how much you want to heat your garment
    • LED shows your heat level setting and if the controller is power ON /OFF
    • The controller has one output but you can control up to three to four heated clothing’s (if they are interconnected to each other) with it, if total power used by all heated clothing is not more than 12 amps
    • It comes with an over load, short circuit and reverse polarity protection feature
    • Light weight, weighing only 50gms /1.76 oz (without wires), comes with a convenient clip-on hook fixed on the back of the controller which can be attached to your waist belt.

    Note: When installing, make sure that coiled wire coming from the controller is fixed to the battery cord and straight wire coming out of the controller is connected to heated clothing

    Learn More
  3. Gen X 3 DUAL TEMPERATURE CONTROLLER

    CA$79.95
    • The dual output temperature controller is stylishly designed. It’s a true variable controller and comes with an inbuilt rotary on and off switch. Controller ensures that your heated clothing uses only as much power as required depending on how much you want to heat your garment
    • The controller has two output for direct connection with two heated clothing but you can control up to three to four heated clothing’s (if they are interconnected to each other) with it, if total power used by all heated clothing is not more than 12 amps on each output channel
    • Dual LED shows your heat level setting and if any of the controller output channel is power ON /OFF
    • It comes with an over load, short circuit and reverse polarity protection feature
    • Light weight, weighing only 100 gms /3.52 oz(without wires), comes with a convenient clip-on hook fixed on the back of the controller which can be attached to your waist belt.
    • GEARS coax DC connector plugs are 5.5 mm in size



    Note: When installing, make sure that coiled wire coming from the controller is fixed to the battery cord and two straight wires coming out of the controller is connected to the heated clothing
    Learn More
  4. Gen X 3 HEATED FOOT WARMERS

    CA$44.95
    • Constructed of light weight EVA foam providing extra warmth and comfort
    • The carbon fiber heating element covers entire foot area providing uniform heat
    • Anti slip material at the bottom keeping the foot warmer in place
    • Easy to install, can be switched over from one shoe to another
    • They can be trimmed to fit any boot size
    • Get multipurpose use of our heated clothing by using our portable battery packs (G5 or G8 battery packs- NOT INCLUDED). Keeps you warm when you are a spectator at a game, on a hunt, enjoying a walk on a cold winter day or indulging in active sports like skiing or snowboarding. Last but not the least it goes a step forward when you want to use it to fix a medical condition and need the extra warmth
    • These foot warmers work with 12 volts battery and provide 14.5 watts of heat and draws 1.2 Amps / pair
    • They can be used by themselves (If used with optional Y cord harness 100233-1 and battery cord 100227-1)
    • No extra hook up required if used with GEARS Gen - X 3 leg chaps
    • Size: One size fit all


    NOTE : Gears Temperature Controller recommended to avoid overheating

    Learn More
  5. SAE TO GEN X 3 COAX MALE PLUG

    CA$9.95
    • Can be used for hooking up the output wires of Gen X 3 temperature controller( single or Dual) to Gen X 2 heated clothing or other brands of Heated clothing ( with SAE connectors)
    • Can be used for connecting Gen X 3 Gloves ( which work in parallel and draw 12 V for each glove) to other brands of heated jacket with SAE glove connection plugs coming out of the sleeves
    • Can be used in front of Gen X 3 battery cord for connecting your battery chargers with a SAE plug connection


    NOTE: GEARS coax DC connector plugs are 5.5 mm in size
    Learn More
  6. GEN X 3 HEATED GLOVE LINER

    CA$74.95

    Heated glove liner is extremely comfortable, made with 85% polyester and 15% lycra
    • Fits under existing gloves or mitts (RECOMMENDED - OUTER GLOVE SHOULD BE WIND PROOF AND WATER PROOF )
    • Heats the entire length of each finger and thumb
    • Engineered to go with our Gen X - 3 Warm Tek Heated Jacket or Gen X-3 Heated Vest
    • If you have a Gen X - 3 Heated Jacket liner , no additional hook up's are required .Plug in your heated glove liners into the convenient hideaway plugs at the sleeves of Gen X - 3 heated jacket
    • If you own a Gen X - 3 Vest you will require additional hook up ( Part # 100226-1/ Snap On/Off Glove Harness) .Which can be easily connected to the snaps provided at the back of the vest
    • If you want to use the liner all by themselves then you will require additional hook up's { Part # 100228-1/Y Glove Harness (with switch) or 100273-1 /Y Glove Harness (with single controller) and 100227-1/Battery Cord}
    • Gen X -3 Warm Tek Heated glove liners work in parallel (each glove uses 12 volts)
    • Get multipurpose use of our heated clothing by using our portable battery packs (ZR5 or ZR8 battery packs- NOT INCLUDED). Keeps you warm when you are a spectator at a game, on a hunt, enjoying a walk on a cold winter day or indulging in active sports like skiing or snowboarding. Last but not the least it goes a step forward when you want to use it to fix a medical condition and need the extra warmth
    • Liner ( as a pair) draws 2 amps of current to produce 24 watts of heat
    • Skin fit makes it feel like 28 watts
    • Available Sizes : XS/S, M/L, XL/XXL


    NOTE : Gears Temperature Controller recommended to avoid overheating


    Learn More
  7. GEN X 3 Y GLOVE HARNESS WITH SWITCH

    CA$29.95
    • Connect the Y harness to the battery cord(NOT INCLUDED) without the need of a GEN X 3 vest or jacket. This will help run the gloves or glove liners all by themselves
    • The Y glove harness can easily pass through your motorcycle jacket and then through the sleeves
    • The wire that comes out from the right sleeve of your arm is kept longer (Assuming the battery connection is done from left side of your Motorcycle)


    NOTE: Gen X 3 connection cords can only be used with Gen X 3 heated clothing. They do not work with Gen X 2 heated clothing Learn More
  8. Gen X 3 SNAP ON/OFF GLOVE HARNESS

    CA$19.95
    • Connects the Gen X 3 gloves to the Gen X 3 vest
    • Snap the Snap On/Off Glove Harness buttons to the back of your Gen X 3 vest and fix the other end to the glove
    • Comes in a pair
    Learn More
  9. SAE To Gen X 3 Coax Female Plug

    CA$15.95
    • Convert ours Gen X – 2 series SAE battery lead or battery tender SAE lead to coax female connector for easy connection of our Gen X -3 series of heated clothing.
    • Size: 5” long
    • NOTE: This cable should not be used to power our Gen X-2 series of gloves with our Gen X- 3 series of jacket or vest glove connection points
    Learn More
  10. Gen X 3 EXTENSION CABLE

    CA$12.95
    • Heavy-duty Coax extension cable provides a greater range of motion or to extend your power output location of your small battery cord output to the front of the vehicle.
    • Useful for connecting GPS or any other 12 V gadget near the handle bar .You can mount our Male Coax / Female Cigar Plug Adapter Cable(100223-1) in front of this extension cable to have ready to use female cigar outlet for easy fix of the GPS or cell phone chargers
    • Coax male plug on one end and a coax female plug on the other end.
    • Available in three lengths - (Small)12",( Medium) 25” and (Large)40" Learn More
Position

Grid  List 

Show10

per page
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6