| |
 Gen X 2 Heated Vest
100170-1 |
|
|
| |
|
Available in : |
 Canada |
|
|
|
| |
|
 USA |
|
|
|
|
| • |
Constructed of 100% polyester, the GEN X-2 HEATED vest is ergonomically designed to fit the body snuggly and gives extra warmth. The outer shell is fire retardant |
| • |
New snap on electric connection on back of vest for arm chaps connections |
| • |
Heated Collars, Works best over T-shirt and under a jacket |
| • |
Comes with all necessary fittings and switch (with an easy to use expandable coiled wire) |
| • |
This vest works with 12 volts battery and provides 38 watts of heat and draws 3.2 amps of current for size 36 to 52 / 60 watts of heat drawing 5 amps of current for size 54 and 56 |
| • |
Battery cord is 20" long and switch cord without expansion is 30" , easily expands to 45" |
| • |
Available sizes: 36, 38, 40, 42, 44, 46, 48, 50, 52, 54 ,56 |
|
| |
 |
|
| |
|
Absolute Zero: Gen X 2
Heated Gloves
100182-1 |
| |
|
|
| |
|
Available in : |
Canada |
|
|
|
| |
|
USA |
|
|
|
|
| • |
The Gex X 2 heated glove has a revolutionary three layered fabric |
| • |
Breathable , Light, strong and contours to the shape of the hand |
| • |
Heats entire length of each finger including the back of your palm. |
| • |
Reflective logo and anti -slip gel on palm to get the extra grip you need |
| • |
Complete Thinsulate insulation used to seal the glove |
| • |
Extra long and wide Gauntlet for added comfort |
| • |
Hooks up to the Gen X 2 line of heated apparel |
| • |
Produces 20Watts of heat and draws 1.8amps of current |
| |
Hook up options for use of heated gloves |
| • |
If you have a Gen X 2 heated vest and Arm Chaps , No additional hook up's required. |
| • |
If you do not have a ARM CHAP but own a Gen X 2 Vest you will require additional hook up ( Part # 100181-1/ Snap On/Off Glove Harness) |
| • |
If you have neither of the Gen X line of Garments you will require additional hook up's ( Part # 100180-1/Y Glove Harness , 100144-1/Battery Cord) |
| • |
Available in Men's and Women's sizes |
| • |
Women's Sizes : S, M, L |
|
| Note : You will feel the heat when both gloves are connected |
|
|
Absolute Zero: Gen X 2
Heated Gloves
100183-1 |
| |
|
|
| |
|
Available in : |
Canada |
|
|
|
| |
|
USA |
|
|
|
|
| • |
The Gex X 2 heated glove has a revolutionary three layered fabric |
| • |
Breathable , Light, strong and contours to the shape of the hand |
| • |
Heats entire length of each finger including the back of your palm. |
| • |
Reflective logo and anti -slip gel on palm to get the extra grip you need |
| • |
Complete Thinsulate insulation used to seal the glove |
| • |
Extra long and wide Gauntlet for added comfort |
| • |
Hooks up to the Gen X 2 line of heated apparel |
| • |
Produces 20Watts of heat and draws 1.8amps of current |
| |
Hook up options for use of heated gloves |
| • |
If you have a Gen X 2 heated vest and Arm Chaps , No additional hook up's required. |
| • |
If you do not have a ARM CHAP but own a Gen X 2 Vest you will require additional hook up ( Part # 100181-1/ Snap On/Off Glove Harness) |
| • |
If you have neither of the Gen X line of Garments you will require additional hook up's ( Part # 100180-1/Y Glove Harness , 100144-1/Battery Cord) |
| • |
Available in Men's and Women's sizes |
| • |
Men's Sizes : M, L, XL, XXL |
|
| Note : You will feel the heat when both gloves are connected |
|
|
| |
|
|
|
| |
Hand
Heater Grips
200113-1 |
|
| |
| • |
Constructed of padded polyester mesh
,making the grips breathable providing
extra warmth and comfort . |
| • |
Anti slip material at the bottom keeping
the grips in place. |
| • |
Easy to install ,can be switched over
from one vehicle to another in seconds. |
| • |
Grips do come with all necessary fittings(battery
cord with inbuilt fuse ,water/dirt protection
cap for most SAE connector plugs and
water resistant switch cord). |
| • |
These grips work with 12 volts battery
and provide 20 watts of heat per grip. |
| • |
Hand heater grips draws 1.7 amps of
current. |
| • |
Size of the each grip panel when layed
flat on ground is 11 cm x 17 cm. |
| • |
With Velcro closure ,the heater grips
are easy to wrap around any tube of
up to 4 cm diameter. |
|
| |
| WIRE
LENGTHS |
| • |
Battery
cord is appox 60 inch long |
| • |
Switch cord
is appox 48 inch long(The shorter
wire from switch to SAE connector
is appx 10 inch and Y shape wire
from switch to the each of the
SAE connetor is appox 38 inch
long) |
| • |
Each wire
coming out of the heater grips
are 12 inch long |
|
|
|
| |
|
|
| |
Battery Cord
100144-1 |
|
|
| |
|
Available in : |
Canada |
|
|
|
| |
|
USA |
|
|
|
|
| • |
Approx Length : 20" |
| • |
The Battery cord is connected to the terminals of your vehicle battery. |
| • |
The wire with fuse goes to the positive terminal,other wire goes to negative terminal. |
| • |
The wire comes with safety (dust proof) cap to be used on SAE connector when left on the vehicle unused. |
|
|
Switch
Cord
100145-1 |
|
|
| |
|
Available in : |
Canada |
|
|
|
| |
|
USA |
|
|
|
|
| • |
Approx length : 30"
without expansion and expands to 45"
when stretched. |
| • |
Connect one side of SAE connector
of the switch cord to the SAE connector
of the battery cord and other side of
SAE connector to your heated apparel. |
|
|
| |
|
Female
Cigar Plug
Adapter
Cable
100148-1 |
|
|
| |
|
Available
in : |
Canada |
|
|
|
| |
|
USA |
|
|
|
|
| • |
Size : Approx :
8" |
| • |
Converts SAE connector to Female
cigar plug outlet. Helps using cell
phone, GPS units etc. |
|
|
Coiled
Extention Cord
100150-1 |
|
|
| |
|
Available
in : |
Canada |
|
|
|
| |
|
USA |
|
|
|
|
| • |
Size : Approx :
17" without Expansion, Stretches
to 35" |
| • |
Increase your distance between your
controller and heated apparels or vehicle
and controller. |
|
|
| |
|
SAE/2SAE
Cable
100152-1 |
|
|
| |
|
Available
in : |
Canada |
|
|
|
| |
|
USA |
|
|
|
|
| • |
Size : Approx : 8" |
| • |
Splits one SAE connector to two SAE
outlets. Great for two heated apparels
to be used at the same time. |
|
|
Male
Cigar Plug/SAE Cable
100153-1 |
|
|
| |
|
Available
in : |
Canada |
|
|
|
| |
|
USA |
|
|
|
|
| • |
Size : Approx : 8" |
| • |
You can easily connect Gears Heated
products to a vehicle with a provision
of female cigar plug (As you find 12V
supply outlet adapter in most of the
cars) by inserting the male cigar plug
provided on the opposite side of this
adapter cable. |
|
|
| |
|
|
Snap On/Off Glove Harness
100181-1 |
| |
|
|
| |
|
Available in : |
Canada |
|
|
|
| |
|
USA |
|
|
|
|
| • |
Connects the Gen X 2 gloves to the Gen X 2 vest |
| • |
Snap the Snap On/Off Glove Harness button's to the back of your Gen X 2 vest and fix the other end(SAE Connector) to the glove without the need of the Gen X 2 Arm Chaps |
| • |
Comes in a pair |
|
|
| |
Pro Tech Temperature
Controller
100151-1 |
|
|
| |
|
Available in : |
Canada |
|
|
|
| |
|
USA |
|
|
|
|
| • |
The Pro Tech temperature controller is ergonomically designed and has a patented electronic circuit. It’s a true variable controller and comes with an inbuilt rotary on and off switch. Controller ensures that your heated clothing uses only as much power as required depending on how much you want to heat your garment. |
| • |
The Pro Tech controller has one output but you can control up to three to four heated clothing’s (if they are interconnected to each other) with it, if total power used by all heated clothing is not more than 10 amps. |
| • |
It comes with an over load , short circuit and reverse polarity protection feature. |
| • |
Light weight, weighing only
146 g / 5.2 oz , comes with a convenient clip-on case for easy placement of your portable temperature controller. |
|
| Note : When installing ,make sure that coiled wire coming from the controller is fixed to the battery cord and straight wire coming out of the controller gets connected to heating apparel. |
|
|
|
